1. Assess the substrate
This is the most important step. You need to know what it will be applied on and what state it is in:
- Loose tiles: fixed first. If they move later, the microcement cracks.
- Grease or dirt: prevent adhesion.
- Unevenness: above 2 mm, self-levelling screed first.
- Damp in the substrate: if it rises from the ground, it must be waterproofed first. Microcement protects from above; it does not stop moisture coming from below.
If you hire a company, make sure it carries out this assessment before quoting.
2. No wood
It is not applied over parquet or floating floors. Wood expands and contracts differently and would pass its movements on to the microcement. It has to be removed down to the substrate beneath.
3. Unrendered walls
On bare brick walls, apply a coat of mortar first. That way the microcement does not have to fill holes.
4. Temperature
Substrate and air temperature affect drying and the result. Avoid applying in extreme cold or heat and follow the product data sheet.
5. Underfloor heating
It is compatible and works very well, but you must switch the heating on before application, so the existing screed completes its expansion and, if it is going to crack, does so beforehand.

