Guide · History

Concrete through history

Nobody knows exactly who first used concrete. It was probably discovered at almost the same time as fire.

The origins

Picture a primitive fire surrounded by limestone, gypsum and clay. The heat calcines the stone and turns it to powder; with a little rain, powder and stones form a solid mass: the first cement.

  • About 7,500 years ago, in the Stone Age, floors were already made by binding lime-rich earth, sand, gravel and water.
  • About 4,500 years ago, the builders of the Pyramid of Cheops used primitive concretes.
  • Greece built aqueducts and cisterns with this material, using volcanic earth as a binder.
  • Rome used it in its great public works and spread it across the empire.

Before cements, fat lime, hydraulic lime and natural cements were used as binders.

Middle Ages and the industrial era

After Rome there is hardly any trace of its use until the 13th century, when it was used, for example, in the foundations of Salisbury Cathedral (England).

In 1824 Joseph Aspdin patented an artificial hydraulic cement, made by burning limestone and clay, which he called Portland cement because it resembled the stone of the Isle of Portland. At first it was little used because it was complex and expensive to make.

From the mid-19th century it was used in maritime works and, by the end of the century, combined with iron as reinforced concrete in bridges and tanks. Rotary kilns made it widespread.

Printed and decorative concrete

The 20th century brought decorative concretes: printed or stamped, with moulds and colours imitating stone or cobbles, and polished. Microcement is their evolution as a thin coating.

Today Portland cement is still, in essence, very similar to the patented one, although its performance has improved greatly.

Questions about your microcement project?

Ask our expert: prices, substrates, bathrooms, outdoor areas or applicators near you.

Ask the expert